欢迎光临深圳市亿金电子有限公司!

收藏本站网站地图 会员登录 会员注册

热门关键词 : 32.768K晶振石英晶体谐振器陶瓷谐振器加高晶振石英晶振陶瓷雾化片石英晶体振荡器爱普生晶振NDK晶振

当前位置首页 » 新闻中心 » 行业新闻 » 伊西斯晶振公司独家首发的高品质SMD振荡器ECS-2333-080-BN-TR

伊西斯晶振公司独家首发的高品质SMD振荡器ECS-2333-080-BN-TR

返回列表 来源:亿金电子 查看手机网址
扫一扫!伊西斯晶振公司独家首发的高品质SMD振荡器ECS-2333-080-BN-TR扫一扫!
浏览:- 发布日期:2022-10-20 17:42:30【
分享到:

伊西斯晶振公司独家首发的高品质SMD振荡器ECS-2333-080-BN-TR,In both cases, the tank circuit is tuned to resonate at some frequency between the fundamental and the desired frequency. This isolates the desired frequency and shunts the rest to ground, leaving only the desired frequency at the output of the oscillator.

When designing an oscillator circuit or laying out your board for and oscillator, certain design considerations should be followed. It is always recommended to avoid parallel traces in order to reduce tray capacitance. All traces should be kept as short as possible and components should be isolated in order to prevent coupling. Ground planes should be used to isolate signals.

谐振电路都被调谐为在基频和所需频率之间的某个频率上谐振。这隔离了所需的频率并将其余频率分流到地,仅在振荡器的输出端留下所需的频率。随之市场对于石英晶振产品的需求只增不减,同时也能够在市场获得大量的机会,ECS坚守初心将最好的品质给到每一位用户。

ECS-2333-080-BN-TR 24伊西斯晶振公司独家首发的高品质SMD振荡器ECS-2333-080-BN-TR,在设计石英晶体振荡器电路或为振荡器布置电路板时,应遵循某些设计注意事项。始终建议避免平行走线以减少托盘电容。所有走线应尽可能短,并且应隔离组件以防止耦合。应使用接地层来隔离信号。

Manufacturer Part Number原厂代码 Manufacturer品牌 Series型号 Frequency 频率 Operating Temperature     工作温度
ECS-2333-245.7-BN-TR ECS晶振 ECS-2333 24.576MHz -40°C ~ 85°C
ECS-2333-245.7-BN-TR ECS晶振 ECS-2333 24.576MHz -40°C ~ 85°C
ECS-2333-080-BN-TR ECS晶振 ECS-2333 8MHz -40°C ~ 85°C
ECS-2333-080-BN-TR ECS晶振 ECS-2333 8MHz -40°C ~ 85°C
ECS-2333-080-BN-TR ECS晶振 ECS-2333 8MHz -40°C ~ 85°C
ECS-2333-040-BN-TR ECS晶振 ECS-2333 4MHz -40°C ~ 85°C
ECS-2333-040-BN-TR ECS晶振 ECS-2333 4MHz -40°C ~ 85°C
ECS-2333-040-BN-TR ECS晶振 ECS-2333 4MHz -40°C ~ 85°C
ECS-2333-120-BN-TR ECS晶振 ECS-2333 12MHz -40°C ~ 85°C
ECS-2333-120-BN-TR ECS晶振 ECS-2333 12MHz -40°C ~ 85°C
ECS-2333-120-BN-TR ECS石英晶体振荡器
ECS-2333 12MHz -40°C ~ 85°C
ECS-3953M-200-B-TR ECS晶振 ECS-3953M 20MHz -10°C ~ 70°C
ECS-3953M-200-B-TR ECS晶振 ECS-3953M 20MHz -10°C ~ 70°C
ECS-3953M-200-B-TR ECS晶振 ECS-3953M 20MHz -10°C ~ 70°C
ECS-3953M-160-B-TR ECS晶振 ECS-3953M 16MHz -10°C ~ 70°C
ECS-3953M-160-B-TR ECS晶振 ECS-3953M 16MHz -10°C ~ 70°C
ECS-3953M-160-B-TR ECS晶振 ECS-3953M 16MHz -10°C ~ 70°C
伊西斯匠心研发设计这款ECS-2333-080-BN-TR,ECS-2325 (2.5V)和ECS-2333 (3.3V)超微型SMD有源晶体振荡器。非常适合当今的高密度应用。低电压HCMOS,3.2 x 2.5 mm占地面积,低电流消耗,低抖动,低电压,PbFree /通过无铅认证。

推荐阅读

    【本文标签】:伊西斯晶振公司独家首发的高品质SMD振荡器ECS 2333 080 BN TR
    【责任编辑】:亿金电子版权所有:http://www.vc-tcxo.com转载请注明出处

    Fast Track
    快速通道

    国内晶振分类:
    Domestic Crystal
    进口晶振分类:
    Import Crystal